All Echo Show models may be configured in the same way.
Setup Instructions for the 3rd Generation Echo Show 10
Configuring the Echo Show 10 (3rd Generation) is quite similar to configuring previous Echo Show devices, but there are a few more capabilities available, such as motion control, that you should make use of when possible. Consequently, below is the procedure for configuring the 3rd Generation Echo Show 10.
Select whether to enable or disable the feature. When the system invites you to use the Echo Show as a camera, you may do so now. Any favorite choice can be selected, and you can change it at any moment through the Settings menu. If you chose Enable, the next step is to click Done. Select On an Island, In a Corner, or Against a Wall from the Where is your Echo Show Placed page on the Echo Show placement page. However, if you do not like to respond, you may just hit the Skip option. Select “Preview” from the drop-down menu. To alter the rotation range, experiment with the Slider. Select “Preview” from the drop-down menu. Save your work by clicking on the Save button. Using the Slider, you may adjust the position of your device’s center point. Select Next from the drop-down menu. The motion setup is completed by clicking the Continue button.
As a result, you may simply make modifications to the motion set up in this manner. It is possible to change the center point and rotation range with the aid of the Slider tool.
Conclusion
The process of configuring the basic information on both the new and previous-generation Echo Shows is very identical. However, if a new version of the firmware is released, this setting can be modified. There are several phases in the setup process for the Echo Show that the user can skip, and those steps can be configured directly from the Settings menu.
